Edgun Leshiy 2 carbon fiber 300 cc tank is custom designed for the Leshiy 2 to provide the maximum shot count while maintaining the gun's exceptional balance.
M18 thread
300 CC
300 Bar working pressure
OEM Leshiy 2 Logo
Custom-fit to allow maximum grip space
12 ounces
7 inches long
2.5 inches diameter
123% increased air receiver volume over OEM configuration
significant increase in shot count
Installing the bottle onto the Leshiy 2

1. Degas gun - locate the bleed screw on the right side of the valve assembly
   •  only crack the bleed; there is a detent ball under the grub screw
   • after 100% of the air is drained, tighten the screw - do not over tighten
2.  Remove auxiliary air tank arm brace - 4mm hex wrench
3. place fill probe into the fill port - this keeps the fill assembly from spinning
4.  Unscrew the auxiliary air tube
5. Unscrew air tube coupling - find the flat spots of the coupling and use a wrench
6.  ensure there is an O-ring at the bottom of the male M18 threads (18X2.5 buna 70)
7. Thread on the new bottle hand tight
8. Fill Leshiy 2 -check for leaks