The REPR for the Leshiy 2 is a transverse or perpendicular micro regulator that is only a few millimeter's tall. It uses a cup that is screwed into the plenum sideways. A mini Belleville washer stack is used along with a single-piston O-ring. Placed between the air reservoir and plenum is a debris plug that prevents contaminants from entering the regulator. The REPR is capable of regulating the plenum pressure between 60-280 BAR. The black disc is used to either increase or decrease pressure in the plenum. With the REPR, increase and decrease of the regulator pressure can be done while the gun is fully charged, no need to degas the Leshiy to adjust the regulator.
Additionally, the REPR is equipped with a removable plug with 1/8 BSPP threads; this is used to check the plenum's pressure if desired. The key to this system is not the volume of the plenum nor the fact that the pressure can go so high - but the combination of the patented valve and high-pressure
- Adjustable 60-280 BAR
- Single O-ring Seal
- 1/8 BSPP Plug for fitting a gauge
- Externally adjustable under pressure - up and down
- Retrofit to any Leshiy 2
- No warranty on high pressure components