Made on special request for the HFT and UK shooters. Huma Air in close cooperation with Airborne Arms NZ, developed this tune kit for the Edgun Leshiy to convert your rifle into a 12 ft/lbs (16 Joule) HFT version with an enormous shotcount.
Our kit contains our micro regulator, a special plenum with a matching valve return spring, a power sleeve and a new softer hammerspring.
The kit is specially designed for .177 but also works fine for .22 and it is capable of providing you an huge shotcount with the highest shot to shot consistency. (see the shotstrings below) 
 

The benefits of the Edgun Leshiy regulator tuning kit:

• Huge increase in shotcount
• Easy to adjust due to the pressure scale, you do not need to gues, or use a reg-tester to set the pressure
• This regulator comes in our special low pressure range of 60-120 bar
• Excellent consistency
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations
• Tested in .177 and .22. (no test data for .25 available yet)
• (Maximum power for this model is tested @ 21 ft/lbs in .22)

When you order your Wdgun Leshiy 12ft/lbs Tuning Kit you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
• A delrin powersleave
• A new valve return spring 
• A new hammer spring
• We will include a “Huma regulated” breech sticker;

If you want to do some more tuning; the regulator has a clear pressure scale so you can easy adjust it to your wishes.
These regulators are also vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.

This Edgun Leshiy regulator model is deveopped and tested in cooperation with Wingman of Airborne Arms NZ. Check his results and fitting instruction in this direct link to to video
Not every rifle is identical and you might try some different setups to get the best results. 




 

PLEASE NOTE:  these shotstrings are made by "Wingman" of Airborne Arms. He is an skilled tuner and spent a lot of time in finding the best performance for his Leshiy. He used a 300 bar fill pressure. (Please check your rifle's owner manual for your maximum fill pressure)
His instructions video will give a good indication of the setup, to tune and adjust your rifle to the best performance you do need some skills in adjusting your hammerspring tension and regulator pressure combination.

Beside the Gen1-Gen2 differences, there are also some different strengths/types of hammersprings used in some leshiy rifles. These rifles might need some different setup and can give another performance.
Please check the tab "Reviews" of this regulator were we share the user feedback and their setup used. Per 1-2018 we include an new softer hammerpring to the set.
 

Extra guides how to set up a regulated rifle and how to adjust the regulator pressure properly

General airrifle adjustment tips, setting up your regulated rilfe
How to adjust the regulator pressure
 

Huma-Air Quality Control

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.